Used to power 12v AC Low Voltage garden lighting systems

60 watt IP64 rated transformer Suitable for Outdoor and Indoor use

One metre input cable with fitted British Standard plug for indoor connection or suitable weatherproof outdoor socket

Supplied complete with 10 metre SPT1 output cable

Assembly Required, Sold in Plain Box, Transformer shape may differ from image

Free system design & quote service to customer’s requirements -- For Technical queries please contact our engineer, Les on 07976 274 399

A guide to sizing your transformer

To decide which transformer to use, times the bulb wattage by the amount of lights you have

Example: bulbs are 6 watt each and you have 6 lights (6watt x 6 lights = 36 watts) (+10%) we always advise to leave at least 10% of the transformer wattage rating free so in this case it would be a 60watt transformer

On older system’s that use Halogen bulbs we advise that these are changed to a LED bulb as these use less power form the transformer, are cheaper to run and the cost of the transformer is also less

Example: 20 watt halogen = approx. 3 watt Led bulb

Used to power 12v AC Low Voltage garden lighting systems

60 watt IP44 rated transformer with Dusk to Dawn control and Timer, Suitable for Outdoor and Indoor use

Two metre input cable with fitted British Standard plug for indoor connection or suitable outdoor socket

The transformer must be vertically mounted and the light sensor (1 metre cable) be placed ‘Outside’ for it to function properly

Timer operation: Remote Sensor / Manual front switch -- Modes: Always On / Off, Dusk to Dawn, Timer 1 – 9 hours

Output socket suitable for 2 pin round screw type connector -- Assembly Required, Sold in Plain Box

Free system design & quote service to customer’s requirements -- For Technical queries please contact our engineer, Les on 07976 274 399

A guide to sizing your transformer

To decide which transformer to use, times the bulb wattage by the amount of lights you have

Example: bulbs are 6 watt each and you have 6 lights (6watt x 6 lights = 36 watts) (+10%) we always advise to leave at least 10% of the transformer wattage rating free so in this case it would be a 60watt transformer

On older system’s that use Halogen bulbs we advise that these are changed to a LED bulb as these use less power form the transformer, are cheaper to run and the cost of the transformer is also less

Example: 20 watt halogen = approx. 3 watt Led bulb

Used on 12volt AC Low Voltage garden lighting systems

Colour: Warm white, Energy Rating = C

Note: Only replace bulbs of the same wattage or lower

For Technical queries please contact our engineer, LES on 07976 274 399

Used on 12volt AC Low Voltage garden lighting systems

Colour: Warm white, Energy Rating = C

Note: Only replace bulbs of the same wattage or lower

For Technical queries please contact our engineer, LES on 07976 274 399

Luxform Low Voltage Transformer 105w 12volt AC

Used as part of the Luxform 12v Low voltage garden lighting system 

105 watt IP64 rated transformer for indoor connection or suitable outdoor socket

One metre input cable with fitted BS plug

Dual Output sockets 2 pin Round screw type ideal for separate lines down a path

Assembly Required, Sold in Plain Box

Free system design & quote service to customer’s requirements -- For Technical queries please contact our engineer, Les on 07976 274 399

A guide to sizing your transformer

To decide which transformer to use, times the bulb wattage by the amount of lights you have

Example: bulbs are 6 watt each and you have 12 lights (6 watt x 12 lights = 72 watts) we always advise to leave at least 10% of the transformer wattage rating free so in this case it would be a 60watt transformer

On older system’s that use Halogen bulbs we advise that these are changed to a LED bulb as these use less power form the transformer, are cheaper to run and the cost of the transformer is also less

Example: 20 watt halogen = approx. 3 watt Led bulb 

Luxform Low Voltage System Connector SPT-3 to SPT-3 (2 Pack) (Thick to Thick)

Used as part of the Luxform 12v AC Low voltage garden system

These are used for extending the system

1.5mm cable to 1.5mm cable (thick to thick)

Not Suitable for use with other types of low voltage cable

Colour black – Sold in plain bag, Assembly Required

Free system design & quote service to customer’s requirements

For Technical queries please contact our engineer, Les on 07976 274 399

Used to power 12v AC Low Voltage garden lighting systems

50 watt IP64 rated transformer for indoor connection or suitable outdoor socket

Two metre input cable with fitted BS plug, Output socket for round screw type 2 pin plug

Assembly Required, Sold in Plain Box, Transformer shape may differ from image

A guide to sizing your transformer

To decide which transformer to use, times the bulb wattage by the amount of lights you have

Example: bulbs are 3 watt each and you have 8 lights (3watt x 8 lights = 24 watts) we always advise to leave at least 10% of the transformer wattage rating free so in this case it would be a 50watt transformer

On older system’s that use Halogen bulbs we advise that these are changed to a LED bulb as these use less power form the transformer, are cheaper to run and the cost of the transformer is also less

Example: 20 watt halogen = approx. 3 watt Led bulb 

T15 LED Bulb Warm White (2PK) 

Bulb Type: T15 LED 

Approx Bulb Size: Diameter 10mm x Overall Height 28mm

Power: 2 watt, 90 Lumen, Energy rating = A+

Assembly Required, Sold in Plain Box